85535E
1.INSTALL POWER OUTLET SOCKET COVER NO.2
Attach the 2 claw fittings to install the cover.
85530E
2.INSTALL POWER OUTLET SOCKET ASSEMBLY
Attach the claw fittings to install the socket.
85536A
3.INSTALL POWER OUTLET SOCKET BEZEL
Connect the connector.
Attach the 4 claw fittings to install the bezel.
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5.PERFORM INITIALIZATION
Perform initialization (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.