89348D
1.REMOVE ULTRASONIC SENSOR CLIP (w/ Clearance Sonar System)
for Corner Sensor: (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR(for Rear Side)>REMOVAL)
89342A
2.REMOVE REAR CENTER ULTRASONIC SENSOR (w/ Clearance Sonar System)
for Corner Sensor: (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR(for Rear Side)>REMOVAL)
89342
3.REMOVE REAR CORNER ULTRASONIC SENSOR (w/ Clearance Sonar System)
for Back Sensor: (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR(for Rear Side)>REMOVAL)
82182
4.REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ Clearance Sonar System)
Disengage the 4 clamps to remove the No. 2 luggage room wire.
52616
5.REMOVE REAR BUMPER ENERGY ABSORBER LH
Remove the rear bumper energy absorber LH.
| *a | Double-sided Tape |
52615
6.REMOVE REAR BUMPER ENERGY ABSORBER RH
Remove the rear bumper energy absorber RH.
| *a | Double-sided Tape |
52164A
7.REMOVE REAR BUMPER PLATE LH (for Standard)
Disengage the 2 claws and remove the rear bumper plate LH.
52163A
8.REMOVE REAR BUMPER PLATE RH (for Standard)
Use the same procedure as for the LH side.
52162B
9.REMOVE NO. 1 REAR BUMPER PLATE (for Sport Package)
Disengage the 2 claws and remove the No. 1 rear bumper plate.
Use the same procedure for the RH side and LH side.
52169C
10.REMOVE LOWER REAR BUMPER COVER (for Sport Package)
Remove the clip.
Disengage the claw and remove the lower rear bumper cover.
81210R
11.REMOVE REAR FOG LIGHT ASSEMBLY (w/ Rear Fog Light)
81920
12.REMOVE REFLEX REFLECTOR ASSEMBLY LH
Remove the screw and reflector.
81910
13.REMOVE REFLEX REFLECTOR ASSEMBLY RH
Use the same procedure as for the LH side.
52156A
14.REMOVE REAR BUMPER SIDE SUPPORT LH
Disengage the 3 claws, and remove the screw and side retainer.
52156B
15.REMOVE REAR NO. 2 BUMPER SIDE SUPPORT LH
Disengage the 3 claws, and remove the screw and side retainer.
52155A
16.REMOVE REAR BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
52155B
17.REMOVE REAR NO. 2 BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.