76801
1.INSTALL BACK DOOR OUTSIDE GARNISH
Install the door outside opener switch with the 2 nuts.
Attach the 2 clips to install the door outside garnish.
Attach the 4 nuts.
Connect the license light connector.
67750
2.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
67937B
3.INSTALL BACK DOOR RH SIDE GARNISH
67938A
4.INSTALL BACK DOOR LH SIDE GARNISH
Perform the same procedure as for the RH side.
67848
5.INSTALL BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)
67939B
6.INSTALL BACK DOOR CENTER GARNISH