REASSEMBLY
Removal / installation · Vehicles built from Jul 2007
| 1. TEMPORARILY TIGHTEN REAR DISC BRAKE BLEEDER PLUG |
| 2. INSTALL REAR DISC BRAKE BLEEDER PLUG CAP |
| 3. INSTALL PISTON SEAL |
Apply lithium soap base glycol grease to a new piston seal.
Install the piston seal onto the disc brake cylinder.
- NOTICE:
- Securely install the piston seal into the groove of the disc brake cylinder.
| 4. INSTALL REAR DISC BRAKE PISTON |
Apply lithium soap base glycol grease to the piston.
Install the piston into the disc brake cylinder.
- NOTICE:
- Do not forcibly install the piston into the disc brake cylinder.
| 5. INSTALL CYLINDER BOOT |
Apply lithium soap base glycol grease to a new cylinder boot.
Install the cylinder boot onto the disc brake cylinder.
- NOTICE:
- Securely install the cylinder boot into the grooves of the disc brake cylinder and piston.
