2011-2016 FJ Cruiser · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jul 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY

  1. A126439
    Disconnect the accelerator pedal rod assembly connector.

  1. Remove the 2 bolts, then remove the accelerator pedal rod assembly.

    NOTICE:
    This accelerator pedal rod assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal rod assembly. If applied, the accelerator pedal rod assembly must be replaced.

← ON-VEHICLE INSPECTION (from Jul 2007)INSTALLATION (from Jul 2007) →