INSPECTION
Inspection · Vehicles built Jul 2007 – Jul 2009
| INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
![]() ![]() |
Check the resistance.
Using an ohmmeter, measure the resistance between the terminals.
- Standard resistance:
Tester Connection
Specified Condition
1 (+B) - 2 (GND)
6.9 to 7.9 Ω at 20°C (68°F)
Check the operation.

Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the valve operates.
- NOTICE:
- Check that the spool valve is not stuck.
- HINT:
- The spool valve may not return if foreign matter is caught in it. This may cause subtle pressure leakage to the advance side, and a DTC may be set.

