Read "PRECAUTION" thoroughly before servicing (Click here).
2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
3.
REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
HINT:
Refer to the procedures up to "REMOVE INSTRUMENT PANEL SUB-ASSEMBLY" (Click here).
4.
DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY
Remove the 3 clamps.
Disconnect the 2 connectors from the front passenger airbag assembly.
5.
REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
Remove screw <B>.
Disengage the 2 claws and remove the side defroster nozzle duct.
6.
REMOVE DEFROSTER NOZZLE ASSEMBLY
Remove the 5 <B> screws.
Disengage the 9 claws and remove the defroster nozzle.
7.
REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
Remove the 2 screws.
Using a screwdriver (with its tip wrapped in protective tape), disengage the 5 hooks from the instrument panel and turn the front passenger airbag assembly in the direction indicated by the arrow shown in the illustration.
Disengage the 5 hooks and remove the front passenger airbag assembly from the instrument panel.