2011-2016 FJ Cruiser · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Aug 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012


1. PRECAUTION

CAUTION:
Read "PRECAUTION" thoroughly before servicing (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.


3. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY

HINT:
Refer to the procedures up to "REMOVE INSTRUMENT PANEL SUB-ASSEMBLY" (Click here).


4. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY
  1. Remove the 3 clamps.

  1. C128212E01
    Disconnect the 2 connectors from the front passenger airbag assembly.


5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

  1. B133874
    Remove the screw <A>.

  1. Disengage the 2 claws and remove the side defroster nozzle duct.


6. REMOVE DEFROSTER NOZZLE ASSEMBLY
  1. Engage the 9 claws and install the defroster nozzle.

  1. Install the 5 <A> screws.


7. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

  1. C128213
    Remove the 2 screws.

  1. C128214E01
    Using a screwdriver (with its tip wrapped in protective tape), disengage the 5 hooks from the instrument panel and turn the front passenger airbag assembly in the direction indicated by the arrow shown in the illustration.

  1. Disengage the 5 hooks and remove the front passenger airbag assembly from the instrument panel.

← REMOVAL (Nov 2010 – Jul 2012)INSTALLATION (Jul 2007 – Oct 2010) →