ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| INSPECT FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION) |
Perform a diagnostic system check (Click here).
With the front seat side airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front seatback pad or front seatback cover with a new one:

- Cuts, minute cracks or marked discoloration on the front seatback assembly around the front seat side airbag assembly.
- Cuts, minute cracks or marked discoloration on the front seatback assembly around the front seat side airbag assembly.
| INSPECT FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) |
Perform a diagnostic system check (Click here).
With the front seat side airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front seat side airbag assembly with a new one:

- Cuts, minute cracks or marked discoloration on the front seat side airbag assembly.
- Cracks or other damage to the wire harness or connector.
- CAUTION:
- For front seat side airbag removal and installation procedures, Click hereand Click here. Be sure to follow the correct procedure.
- Cuts, minute cracks or marked discoloration on the front seat side airbag assembly.
