2011-2016 FJ Cruiser · Service Manual RESTRAINTS

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010

HINT:
  1. Use these procedures to troubleshoot the seat belt warning system.
  2. *: Use an intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding.
    NEXT

    3.PROBLEM SYMPTOMS TABLE
      Result: 
      Result
      Proceed to
      Fault is not listed in problem symptoms table
      A
      Fault is listed in problem symptoms table
      B

    B.
    A

    4.OVERALL ANALYSIS AND TROUBLESHOOTING *
    1. DATA LIST / ACTIVE TEST (Click here)

    2. Terminals of ECU (Click here)

    NEXT

    5.REPAIR OR REPLACE
      NEXT

      6.CONFIRMATION TEST
        NEXT

        ← SYSTEM DESCRIPTION (from Nov 2010)HOW TO PROCEED WITH TROUBLESHOOTING (from Nov 2010) →