TERMINALS OF ECU
System information · Vehicles built Nov 2010 – Jul 2011
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2011 from Aug 2011
| CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY |


| *A |
for LHD |
*B |
for RHD |
Disconnect the H5 or G8 switch connector.
Measure the resistance and voltage according to the value(s) in the table below.
for LHD Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
H5-9 (B) - Body ground
W - Body ground
Ignition power supply
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
H5-1 (E) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
If the result is not as specified, there may be a malfunction on the wire harness side.for RHD Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
G8-15 (B) - Body ground
W - Body ground
Ignition power supply
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
G8-7 (E) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
Reconnect the H5 or G8 switch connector.
Measure the voltage according to the value(s) in the table below.
for LHD Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
H5-3 (U) - H5-1 (E)
L - W-B
Power window motor UP output
Ignition switch ON, driver side power window switch OFF → UP (manual operation)
Below 1 V → 11 to 14 V
H5-4 (D) - H5-1 (E)
L-B - W-B
Power window motor DOWN output
Ignition switch ON, driver side power window switch OFF → DOWN (manual operation)
Below 1 V → 11 to 14 V
Ignition switch ON, driver side power window fully closed → driver side power window switch DOWN (AUTO operation) → driver side power window fully open
Below 1 V → 11 to 14 V → Below 1 V
If the result is not as specified, the master switch may have a malfunction.for RHD Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
G8-12 (U) - G8-7 (E)
R-B - W-B
Power window motor UP output
Ignition switch ON, driver side power window switch OFF → UP (manual operation)
Below 1 V → 11 to 14 V
G8-10 (D) - G8-7 (E)
R - W-B
Power window motor DOWN output
Ignition switch ON, driver side power window switch OFF→ DOWN (manual operation)
Below 1 V → 11 to 14 V
Ignition switch ON, driver side power window fully closed → driver side power window switch DOWN (AUTO operation) → driver side power window fully open
Below 1 V → 11 to 14 V
Check the AUTO light illumination.
After turning the ignition switch ON, check that the AUTO light illuminates (amber).
| CHECK POWER WINDOW REGULATOR SWITCH ASSEMBLY |


| *A |
for LHD |
*B |
for RHD |
Disconnect the G6 or H7 power window regulator switch assembly connector.
Measure the voltage according to the value(s) in the table below.
for LHD Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
G6-4 (B) - Body ground
W - Body ground
Ignition power supply
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
G6-1 (D) - Body ground
L-B - Body ground
Power window motor DOWN output
Ignition switch ON, power window switch OFF → DOWN
Below 1 V → 11 to 14 V
G6-2 (SD) - Body ground
R - Body ground
Power window motor DOWN input (Remote)
Ignition switch ON, power window master switch OFF → DOWN (Remote)
Below 1 V → 11 to 14 V
G6-3 (U) - Body ground
L - Body ground
Power window motor UP output
Ignition switch ON, power window switch OFF → UP
Below 1 V → 11 to 14 V
G6-5 (SU) - Body ground
R-B - Body ground
Power window motor UP input (Remote)
Ignition switch ON, power window master switch OFF → UP (Remote)
Below 1 V → 11 to 14 V
If the result is not as specified, there may be a malfunction on the wire harness side.for RHD Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
H7-3 (B) - Body ground
L - Body ground
Ignition power supply
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
H7-1 (D) - Body ground
L-B - Body ground
Power window motor DOWN output
Ignition switch ON, power window switch OFF → DOWN
Below 1 V → 11 to 14 V
H7-2 (SD) - Body ground
R - Body ground
Power window motor DOWN input (Remote)
Ignition switch ON, power window master switch OFF → DOWN (Remote)
Below 1 V → 11 to 14 V
H7-4 (U) - Body ground
W - Body ground
Power window motor UP output
Ignition switch ON, power window switch OFF → UP
Below 1 V → 11 to 14 V
H7-5 (SU) - Body ground
R-B - Body ground
Power window motor UP input (Remote)
Ignition switch ON, power window master switch OFF → UP (Remote)
Below 1 V → 11 to 14 V
Reconnect the G6 or H7 power window regulator switch assembly connector.