2011-2016 FJ Cruiser · Service Manual SUSPENSION & AXLE

INSTALLATION

Removal / installation · Vehicles built from Nov 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Oct 2012 from Nov 2012


1. TEMPORARILY TIGHTEN FRONT LOWER SUSPENSION ARM

  1. G020160E04
    Align the matchmarks on the No. 2 camber adjust cam and the toe adjust cam.
    Text in Illustration 
    *a
    Matchmarks

  1. Temporarily tighten the bolt and the nut.

  1. Install the lower ball joint attachment with a new nut and a new cotter pin.

    Torque:
    140 N*m{ 1428 kgf*cm , 103 ft.*lbf }

  1. C233440
    Install the lower ball joint attachment with the 2 bolts.

    Torque:
    160 N*m{ 1631 kgf*cm , 118 ft.*lbf }


2. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

  1. C099159
    Install the front shock absorber with coil spring, bolt and washer, and temporarily tighten the nut.


3. INSTALL FRONT WHEEL

Torque:
112 N*m{ 1137 kgf*cm , 82 ft.*lbf }


4. STABILIZE SUSPENSION
  1. Lower the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.


5. FULLY TIGHTEN FRONT LOWER SUSPENSION ARM

  1. G020160
    Fully tighten the bolt and the nut.

    Torque:
    175 N*m{ 1785 kgf*cm , 129 ft.*lbf }


6. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

  1. C099159
    Fully tighten the nut.

    Torque:
    95 N*m{ 969 kgf*cm , 70 ft.*lbf }


7. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
(Click here)
← INSTALLATION (Nov 2010 – Oct 2012)COMPONENTS (from Jul 2007) →