2011-2016 FJ Cruiser · Service Manual SUSPENSION & AXLE

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2007


1. REMOVE NO. 2 SKID CONTROL SENSOR CLAMP

  1. Type A:

    1. C235627
      Remove the bolt and the No. 2 skid control sensor clamp from the steering knuckle.

  1. Type B:

    1. C235320
      Remove the bolt and the No. 2 skid control sensor clamp from the steering knuckle.


2. REMOVE STEERING KNUCKLE OIL SEAL

F042766
  1. Using a screwdriver and hammer, remove the oil seal.


3. REMOVE FRONT AXLE HUB

F042759
  1. Remove the 4 bolts, axle hub and dust cover from the steering knuckle.

  1. Remove the O-ring from the axle hub.


4. REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY

F042760E02
  1. Gently fix the front axle hub in a vise.

  1. Using SST, remove the bearing.

    SST
    09710-30021   (09710-03051)
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)


5. REMOVE FRONT AXLE HUB OIL SEAL

F042761
  1. Using a screwdriver, remove the oil seal.

← REMOVAL (from Jul 2007)REASSEMBLY (from Jul 2007) →