2011-2016 FJ Cruiser · Service Manual SUSPENSION & AXLE

REASSEMBLY

Removal / installation · Vehicles built from Jul 2007


1. INSTALL FRONT AXLE HUB OIL SEAL

C235699E01
  1. Using SST and a hammer, install a new oil seal.

    SST
    09608-36010  
    09950-70010   (09951-07100)


2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY

C098702E01
  1. Using SST and a press, install a new bearing onto the axle hub.

    SST
    09649-17010  


3. INSTALL FRONT AXLE HUB
  1. Apply MP grease to a new O-ring.

  1. Install the new O-ring onto the axle hub.

  1. F042759
    Install the dust cover and axle hub onto the steering knuckle with the 4 bolts.

    Torque:
    80 N*m{ 816 kgf*cm , 59 ft.*lbf }


4. INSTALL STEERING KNUCKLE OIL SEAL

F042767E02
  1. Using SST and a press, install a new oil seal.

    SST
    09527-17011  
    09950-70010   (09951-07100)
    09951-01000  


5. INSTALL NO. 2 SKID CONTROL SENSOR CLAMP

  1. Type A:

    1. C235627
      Install the No. 2 skid control sensor clamp onto the steering knuckle with the bolt.

      Torque:
      13 N*m{ 127 kgf*cm , 9 ft.*lbf }

  1. Type B:

    1. C235320
      Install the No. 2 skid control sensor clamp onto the steering knuckle with the bolt.

      Torque:
      13 N*m{ 127 kgf*cm , 9 ft.*lbf }

← DISASSEMBLY (from Jul 2007)INSTALLATION (Jul 2007 – Oct 2010) →