REMOVAL
Removal / installation · Vehicles built from Nov 2010
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 from Nov 2010
| 1. REMOVE CYLINDER HEAD SUB-ASSEMBLY (for Bank 1) |
Remove the cylinder head (Click here).
| 2. REMOVE NO. 1 WATER OUTLET PIPE |
Disconnect the 4 wire harness clamps.

Remove the 2 nuts, bolt and No. 1 water outlet pipe.
| 3. REMOVE KNOCK SENSOR |
Disconnect the 2 sensor connectors.

Remove the 2 bolts and 2 sensors.
