REMOVAL
Removal / installation · Vehicles built from Jul 2007
| 1. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY |
| 2. REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING |
![]() ![]() |
Remove the compression spring.
| 3. REMOVE CLUTCH PEDAL SUB-ASSEMBLY |
![]() ![]() |
Remove the bolt and nut.
Remove the clutch pedal from the clutch pedal support.
| 4. REMOVE CLUTCH PEDAL SPRING HOLDER |
![]() ![]() |
Remove the clutch pedal spring holder from the clutch pedal support.
| 5. REMOVE CLUTCH SWITCH ASSEMBLY |
![]() ![]() |
Loosen the lock nut and remove the clutch switch.
| 6. REMOVE CLUTCH PEDAL PAD |
| 7. REMOVE CLUTCH PEDAL BUSH |
![]() ![]() |
Remove the 2 bushes from the clutch pedal.
| 8. REMOVE CLUTCH PEDAL SHAFT COLLAR |
![]() ![]() |
Remove the clutch pedal shaft collar.
| 9. REMOVE CLUTCH PEDAL NO.1 CUSHION |
![]() ![]() |
Using needle-nose pliers, remove the 3 No. 1 cushions from the clutch pedal.
| 10. REMOVE CLUTCH PEDAL TURNOVER BUSH |
![]() ![]() |
Remove the clutch pedal turnover bush from the clutch pedal.
| 11. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH |
![]() ![]() |
Using an 8 mm hexagon wrench and a hammer, remove the clevis bush.










