REMOVAL
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| 1.
REMOVE MANUAL TRANSMISSION ASSEMBLY |
 |
(Click here)
| 2.
REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY |
 |
Remove the clutch release fork together with the clutch release bearing from the transmission assembly.
| 3.
REMOVE CLUTCH RELEASE BEARING ASSEMBLY |
 |
Remove the clutch release bearing assembly from the clutch release fork.
| 4.
REMOVE RELEASE FORK SUPPORT |
 |
Remove the release fork support from the transaxle assembly.
| 5.
REMOVE RELEASE BEARING HUB CLIP |
|
| 6.
REMOVE CLUTCH COVER ASSEMBLY |
 |
Align the matchmark on the clutch cover assembly with the one on the flywheel sub-assembly.
Loosen each set bolt one turn at a time until the spring tension is released.
Remove the 6 bolts and clutch cover assembly.
- NOTICE:
- Do not drop the clutch disc assembly.
| 7.
REMOVE CLUTCH DISC ASSEMBLY |
 |
- NOTICE:
- Keep the lining part of the clutch disc assembly, pressure plate and surface of the flywheel sub-assembly free from oil and foreign matter.