2011-2016 FJ Cruiser · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


1. REMOVE MANUAL TRANSMISSION ASSEMBLY
(Click here)

2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

F050785
  1. Remove the clutch release fork together with the clutch release bearing from the transmission assembly.


3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY
  1. Remove the clutch release bearing assembly from the clutch release fork.


4. REMOVE RELEASE FORK SUPPORT
  1. Remove the release fork support from the transaxle assembly.


5. REMOVE RELEASE BEARING HUB CLIP

6. REMOVE CLUTCH COVER ASSEMBLY

C135775E02
  1. Align the matchmark on the clutch cover assembly with the one on the flywheel sub-assembly.

    Text in Illustration 
    *a
    Matchmark

  1. Loosen each set bolt one turn at a time until the spring tension is released.

  1. Remove the 6 bolts and clutch cover assembly.

    NOTICE:
    Do not drop the clutch disc assembly.


7. REMOVE CLUTCH DISC ASSEMBLY

NOTICE:
Keep the lining part of the clutch disc assembly, pressure plate and surface of the flywheel sub-assembly free from oil and foreign matter.

← REMOVAL (Jul 2007 – Oct 2010)INSPECTION (from Jul 2007) →