2011-2016 FJ Cruiser · Service Manual STEERING

INSPECTION

Inspection · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


INSPECT TIE ROD END SUB-ASSEMBLY

ZK08184E01
  1. Flip the ball joint stud back and forth 5 times as shown in the illustration before installing the nut.

  1. Using a torque wrench, turn the nut continuously at a rate of 2 to 4 seconds per turn and check the torque reading on the 5th turn.

    Torque:
    0.29 to 1.96 N*m{ 2.96 to 20 kgf*cm , 2.56 to 17.35 in.*lbf }


INSPECT POWER STEERING RACK

ZX09355E03
  1. Using a dial indicator, check the power steering rack for runout, teeth wear and damage.

    Maximum runout:
    0.3 mm (0.012 in.)

    If necessary, replace the power steering link assembly.

  1. Check the back surface for wear and damage.
    If necessary, replace the power steering link assembly.

← DISASSEMBLY (from Nov 2010)INSPECTION (from Nov 2010) →