TERMINALS OF ECU
System information · Vehicles built Nov 2010 – Jul 2014
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014
| CHECK MAIN BODY ECU (for LHD) |




Disconnect the 1B, 1E and 1H main body ECU connectors.
Measure the voltages and resistances of the wire harness side connectors.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
1H-2 (GND1) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
1B-4 (BECU) - Body ground
W-R - Body ground
Power source circuit (From battery)
Always
11 to 14 V
1E-9 (BDR1) - Body ground
B-Y - Body ground
Power source circuit (From battery)
Always
11 to 14 V
Reconnect the main body ECU connectors.
Measure the voltages of the wire harness side connectors.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
1F-8 (SIG) - Body ground
B-R - Body ground
Ignition switch signal
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
1L-9 (ACT+) - Body ground
L-R - Body ground
Front door lock motor LH LOCK drive output
Door control switch and door key cylinder OFF
Below 1 V
Door control switch or door key cylinder ON (LOCK)
11 to 14 V → Below 1 V
1L-6 (ACT+) - Body ground
L-R - Body ground
Front door lock motor RH LOCK drive output
Door control switch and door key cylinder OFF
Below 1 V
Door control switch or door key cylinder ON (LOCK)
11 to 14 V → Below 1 V
1L-21 (ACT-) - Body ground
L-B - Body ground
Front door lock motor LH UNLOCK drive output
Door control switch and door key cylinder OFF
Below 1 V
Door control switch or door key cylinder ON (UNLOCK)
11 to 14 V → Below 1 V
1L-18 (ACT-) - Body ground
L-B - Body ground
Front door lock motor RH UNLOCK drive output
Door control switch and door key cylinder OFF
Below 1 V
Door control switch or door key cylinder ON (UNLOCK)
11 to 14 V → Below 1 V
E6-21 (LSWD) - Body ground
W-R - Body ground
Driver side door unlock detection switch input
Driver side door unlocked
Below 1 V
Driver side door locked
9 to 14 V (or pulse generation)
E6-30 (LSWP) - Body ground
B-W - Body ground
Passenger side door unlock detection switch input
Passenger side door unlocked
Below 1 V
Passenger side door locked
9 to 14 V (or pulse generation)
1F-4 (LSR) - Body ground
B - Body ground
Back door unlock detection switch input
Back door unlocked
Below 1 V
Back door locked
9 to 14 V (or pulse generation)
1K-3 (L2) - Body ground
L - Body ground
Driver side and passenger side door key-linked operated door lock switch input
Driver side and passenger side door key cylinder OFF
9 to 14 V (or pulse generation)
Driver side or passenger side door key cylinder ON (LOCK)
Below 1 V
E6-22 (UL2) - Body ground
Y-G - Body ground
Driver side and passenger side door key-linked operated door unlock switch input
Driver side and passenger side door key cylinder OFF
9 to 14 V (or pulse generation)
Driver side or passenger side door key cylinder ON (UNLOCK)
Below 1 V
E7-7 (BCTY) - Body ground
W - Body ground
Back door courtesy switch and back window courtesy switch input
Back door is open
Below 1 V
Back door is closed
9 to 14 V (or pulse generation)
E7-11 (RLCY) - Body ground
P-B - Body ground
Rear LH door courtesy switch input
Rear LH door open
Below 1 V
Rear LH door closed
9 to 14 V (or pulse generation)
E7-12 (RRCY) - Body ground
P-L - Body ground
Rear RH door courtesy switch input
Rear RH door open
Below 1 V
Rear RH door closed
9 to 14 V (or pulse generation)
E7-23 (DCTY) - Body ground
R-B - Body ground
Driver door courtesy switch input
Driver door open
Below 1 V
Driver door closed
9 to 14 V (or pulse generation)
E7-24 (PCTY) - Body ground
R-B - Body ground
Front passenger door courtesy switch input
Front passenger door open
Below 1 V
Front passenger door closed
9 to 14 V (or pulse generation)
E8-14 (KSW) - Body ground
G-Y - Body ground
Key unlock warning switch input
Key inserted in ignition key cylinder
Below 1 V
Key removed from ignition key cylinder
9 to 14 V (or pulse generation)
E6-23 (MPX2) - Body ground
BR-R - Body ground
Multiplex communication signal
During communication
Signal waveform
| CHECK MAIN BODY ECU (for RHD) |




Disconnect the 1E, 1H and 1L main body ECU connectors.
Measure the voltages and resistances of the wire harness side connectors.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
1H-2 (GND1) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
1L-4 (BECU) - Body ground
W-R - Body ground
Power source circuit (From battery)
Always
11 to 14 V
1E-9 (BDR1) - Body ground
B - Body ground
Power source circuit (From battery)
Always
11 to 14 V
Reconnect the main body ECU connectors.
Measure the voltages of the wire harness side connectors.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
1J-28 (SIG) - Body ground
B-R - Body ground
Ignition switch signal
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
1L-9 (ACT+) - Body ground
L-R - Body ground
Front door lock motor LH LOCK drive output
Door control switch and door key cylinder OFF
Below 1 V
Door control switch or door key cylinder ON (LOCK)
11 to 14 V → Below 1 V
1L-6 (ACT+) - Body ground
L-R - Body ground
Front door lock motor RH LOCK drive output
Door control switch and door key cylinder OFF
Below 1 V
Door control switch or door key cylinder ON (LOCK)
11 to 14 V → Below 1 V
1L-21 (ACT-) - Body ground
L-B - Body ground
Front door lock motor LH UNLOCK drive output
Door control switch and door key cylinder OFF
Below 1 V
Door control switch or door key cylinder ON (UNLOCK)
11 to 14 V → Below 1 V
1L-18 (ACT-) - Body ground
L-B - Body ground
Front door lock motor RH UNLOCK drive output
Door control switch and door key cylinder OFF
Below 1 V
Door control switch or door key cylinder ON (UNLOCK)
11 to 14 V → Below 1 V
E6-21 (LSWD) - Body ground
W-R - Body ground
Driver side door unlock detection switch input
Driver side door unlocked
Below 1 V
Driver side door locked
9 to 14 V (or pulse generation)
E6-30 (LSWP) - Body ground
B-W - Body ground
Passenger side door unlock detection switch input
Passenger side door unlocked
Below 1 V
Passenger side door locked
9 to 14 V (or pulse generation)
1K-16 (LSR) - Body ground
B - Body ground
Back door unlock detection switch input
Back door unlocked
Below 1 V
Back door locked
9 to 14 V (or pulse generation)
1K-3 (L2) - Body ground
L - Body ground
Driver side and passenger side door key-linked operated door lock switch input
Driver side and passenger side door key cylinder OFF
9 to 14 V (or pulse generation)
Driver side or passenger side door key cylinder ON (LOCK)
Below 1 V
E6-22 (UL2) - Body ground
Y-G - Body ground
Driver side and passenger side door key-linked operated door unlock switch input
Driver side and passenger side door key cylinder OFF
9 to 14 V (or pulse generation)
Driver side or passenger side door key cylinder ON (UNLOCK)
Below 1 V
E7-7 (BCTY) - Body ground
W - Body ground
Back door courtesy switch and back window courtesy switch input
Back door is open
Below 1 V
Back door is closed
9 to 14 V (or pulse generation)
E7-11 (RLCY) - Body ground
P-B - Body ground
Rear LH door courtesy switch input
Rear LH door open
Below 1 V
Rear LH door closed
9 to 14 V (or pulse generation)
E7-12 (RRCY) - Body ground
P-L - Body ground
Rear RH door courtesy switch input
Rear RH door open
Below 1 V
Rear RH door closed
9 to 14 V (or pulse generation)
E7-23 (DCTY) - Body ground
R-B - Body ground
Driver door courtesy switch input
Driver door open
Below 1 V
Driver door closed
9 to 14 V (or pulse generation)
E7-24 (PCTY) - Body ground
G - Body ground
Front passenger door courtesy switch input
Front passenger door open
Below 1 V
Front passenger door closed
9 to 14 V (or pulse generation)
E8-14 (KSW) - Body ground
G-Y - Body ground
Key unlock warning switch input
Key inserted in ignition key cylinder
Below 1 V
Key removed from ignition key cylinder
9 to 14 V (or pulse generation)
E6-23 (MPX2) - Body ground
BR-R - Body ground
Multiplex communication signal
During communication
Signal waveform
| CHECK BACK DOOR ECU |


Disconnect the S2 back door ECU connector.
Measure the voltages and resistances of the wire harness side connectors.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
S2-5 (BECU) - Body ground
W-R - Body ground
Power source circuit (From battery)
Always
11 to 14 V
S2-3 (GND) - Body ground)
W-B - Body ground
Ground
Always
Below 1 Ω
Reconnect the back door ECU connector.
Measure the voltages of the wire harness side connectors.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
S2-6 (SIG) - Body ground
B-R - Body ground
Ignition switch signal
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
S5-5 (L) - Body ground
L - Body ground
Back door key-linked operated door lock switch input
Back door key cylinder OFF
Pulse generation
Back door key cylinder ON (LOCK)
Below 1 V
S5-4 (UL) - Body ground
R - Body ground
Back door key-linked operated door unlock switch input
Back door key cylinder OFF
Pulse generation
Back door key cylinder ON (UNLOCK)
Below 1 V
S2-1 (MPX2) - Body ground
BR-R - Body ground
Multiplex communication signal
During communication
Signal waveform
S5-15 (ACT+) - Body ground
G - Body ground
Back door lock motor LOCK drive output
Door control switch and door key cylinder OFF
Below 1 V
Door control switch or door key cylinder ON (LOCK)
11 to 14 V → Below 1 V
S5-14 (ACT-) - Body ground
W - Body ground
Back door lock motor UNLOCK drive output
Door control switch and door key cylinder OFF
Below 1 V
Door control switch or door key cylinder ON (UNLOCK)
11 to 14 V → Below 1 V