2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

TERMINALS OF ECU

System information · Vehicles built from Aug 2014

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014


CHECK MAIN BODY ECU (for LHD)
B136051E12
B136052E07
  1. Disconnect the 1B, 1E and 1H main body ECU connectors.

  2. Measure the voltages and resistances of the wire harness side connectors.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    1H-2 (GND1) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    1B-4 (BECU) - Body ground
    W-R - Body ground
    Power source circuit (From battery)
    Always
    11 to 14 V
    1E-9 (BDR1) - Body ground
    B-Y - Body ground
    Power source circuit (From battery)
    Always
    11 to 14 V

  3. Reconnect the main body ECU connectors.

  4. Measure the voltages of the wire harness side connectors.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    1F-8 (SIG) - Body ground
    B-R - Body ground
    Ignition switch signal
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    1L-9 (ACT+) - Body ground
    L-R - Body ground
    Front door lock motor LH LOCK drive output
    Door control switch and door key cylinder OFF
    Below 1 V
    Door control switch or door key cylinder ON (LOCK)
    11 to 14 V → Below 1 V
    1L-6 (ACT+) - Body ground
    L-R - Body ground
    Front door lock motor RH LOCK drive output
    Door control switch and door key cylinder OFF
    Below 1 V
    Door control switch or door key cylinder ON (LOCK)
    11 to 14 V → Below 1 V
    1L-21 (ACT-) - Body ground
    L-B - Body ground
    Front door lock motor LH UNLOCK drive output
    Door control switch and door key cylinder OFF
    Below 1 V
    Door control switch or door key cylinder ON (UNLOCK)
    11 to 14 V → Below 1 V
    1L-18 (ACT-) - Body ground
    L-B - Body ground
    Front door lock motor RH UNLOCK drive output
    Door control switch and door key cylinder OFF
    Below 1 V
    Door control switch or door key cylinder ON (UNLOCK)
    11 to 14 V → Below 1 V
    E6-21 (LSWD) - Body ground
    W-R - Body ground
    Driver side door unlock detection switch input
    Driver side door unlocked
    Below 1 V
    Driver side door locked
    9 to 14 V (or pulse generation)
    E6-30 (LSWP) - Body ground
    B-W - Body ground
    Passenger side door unlock detection switch input
    Passenger side door unlocked
    Below 1 V
    Passenger side door locked
    9 to 14 V (or pulse generation)
    1F-4 (LSR) - Body ground
    B - Body ground
    Back door unlock detection switch input
    Back door unlocked
    Below 1 V
    Back door locked
    9 to 14 V (or pulse generation)
    1K-3 (L2) - Body ground
    L - Body ground
    Driver side and passenger side door key-linked operated door lock switch input
    Driver side and passenger side door key cylinder OFF
    9 to 14 V (or pulse generation)
    Driver side or passenger side door key cylinder ON (LOCK)
    Below 1 V
    E6-22 (UL2) - Body ground
    Y-G - Body ground
    Driver side and passenger side door key-linked operated door unlock switch input
    Driver side and passenger side door key cylinder OFF
    9 to 14 V (or pulse generation)
    Driver side or passenger side door key cylinder ON (UNLOCK)
    Below 1 V
    E7-7 (BCTY) - Body ground
    W - Body ground
    Back door courtesy switch and back window courtesy switch input
    Back door or back window is open
    Below 1 V
    Back door and back window are closed
    9 to 14 V (or pulse generation)
    E7-11 (RLCY) - Body ground
    P-B - Body ground
    Rear LH door courtesy switch input
    Rear LH door open
    Below 1 V
    Rear LH door closed
    9 to 14 V (or pulse generation)
    E7-12 (RRCY) - Body ground
    P-L - Body ground
    Rear RH door courtesy switch input
    Rear RH door open
    Below 1 V
    Rear RH door closed
    9 to 14 V (or pulse generation)
    E7-23 (DCTY) - Body ground
    R-B - Body ground
    Driver door courtesy switch input
    Driver door open
    Below 1 V
    Driver door closed
    9 to 14 V (or pulse generation)
    E7-24 (PCTY) - Body ground
    R-B - Body ground
    Front passenger door courtesy switch input
    Front passenger door open
    Below 1 V
    Front passenger door closed
    9 to 14 V (or pulse generation)
    E8-14 (KSW) - Body ground
    G-Y - Body ground
    Key unlock warning switch input
    Key inserted in ignition key cylinder
    Below 1 V
    Key removed from ignition key cylinder
    9 to 14 V (or pulse generation)
    E6-23 (MPX2) - Body ground
    BR-R - Body ground
    Multiplex communication signal
    During communication
    Signal waveform


CHECK MAIN BODY ECU (for RHD)
B264337E01
B264338E01
  1. Disconnect the 1E, 1H and 1L main body ECU connectors.

  2. Measure the voltages and resistances of the wire harness side connectors.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    1H-2 (GND1) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    1L-4 (BECU) - Body ground
    W-R - Body ground
    Power source circuit (From battery)
    Always
    11 to 14 V
    1E-9 (BDR1) - Body ground
    B - Body ground
    Power source circuit (From battery)
    Always
    11 to 14 V

  3. Reconnect the main body ECU connectors.

  4. Measure the voltages of the wire harness side connectors.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    1J-28 (SIG) - Body ground
    B-R - Body ground
    Ignition switch signal
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    1L-9 (ACT+) - Body ground
    L-R - Body ground
    Front door lock motor LH LOCK drive output
    Door control switch and door key cylinder OFF
    Below 1 V
    Door control switch or door key cylinder ON (LOCK)
    11 to 14 V → Below 1 V
    1L-6 (ACT+) - Body ground
    L-R - Body ground
    Front door lock motor RH LOCK drive output
    Door control switch and door key cylinder OFF
    Below 1 V
    Door control switch or door key cylinder ON (LOCK)
    11 to 14 V → Below 1 V
    1L-21 (ACT-) - Body ground
    L-B - Body ground
    Front door lock motor LH UNLOCK drive output
    Door control switch and door key cylinder OFF
    Below 1 V
    Door control switch or door key cylinder ON (UNLOCK)
    11 to 14 V → Below 1 V
    1L-18 (ACT-) - Body ground
    L-B - Body ground
    Front door lock motor RH UNLOCK drive output
    Door control switch and door key cylinder OFF
    Below 1 V
    Door control switch or door key cylinder ON (UNLOCK)
    11 to 14 V → Below 1 V
    E6-21 (LSWD) - Body ground
    W-R - Body ground
    Driver side door unlock detection switch input
    Driver side door unlocked
    Below 1 V
    Driver side door locked
    9 to 14 V (or pulse generation)
    E6-30 (LSWP) - Body ground
    B-W - Body ground
    Passenger side door unlock detection switch input
    Passenger side door unlocked
    Below 1 V
    Passenger side door locked
    9 to 14 V (or pulse generation)
    1K-16 (LSR) - Body ground
    B - Body ground
    Back door unlock detection switch input
    Back door unlocked
    Below 1 V
    Back door locked
    9 to 14 V (or pulse generation)
    1K-3 (L2) - Body ground
    L - Body ground
    Driver side and passenger side door key-linked operated door lock switch input
    Driver side and passenger side door key cylinder OFF
    9 to 14 V (or pulse generation)
    Driver side or passenger side door key cylinder ON (LOCK)
    Below 1 V
    E6-22 (UL2) - Body ground
    Y-G - Body ground
    Driver side and passenger side door key-linked operated door unlock switch input
    Driver side and passenger side door key cylinder OFF
    9 to 14 V (or pulse generation)
    Driver side or passenger side door key cylinder ON (UNLOCK)
    Below 1 V
    E7-7 (BCTY) - Body ground
    W - Body ground
    Back door courtesy switch and back window courtesy switch input
    Back door or back window is open
    Below 1 V
    Back door and back window are closed
    9 to 14 V (or pulse generation)
    E7-11 (RLCY) - Body ground
    P-B - Body ground
    Rear LH door courtesy switch input
    Rear LH door open
    Below 1 V
    Rear LH door closed
    9 to 14 V (or pulse generation)
    E7-12 (RRCY) - Body ground
    P-L - Body ground
    Rear RH door courtesy switch input
    Rear RH door open
    Below 1 V
    Rear RH door closed
    9 to 14 V (or pulse generation)
    E7-23 (DCTY) - Body ground
    R-B - Body ground
    Driver door courtesy switch input
    Driver door open
    Below 1 V
    Driver door closed
    9 to 14 V (or pulse generation)
    E7-24 (PCTY) - Body ground
    G - Body ground
    Front passenger door courtesy switch input
    Front passenger door open
    Below 1 V
    Front passenger door closed
    9 to 14 V (or pulse generation)
    E8-14 (KSW) - Body ground
    G-Y - Body ground
    Key unlock warning switch input
    Key inserted in ignition key cylinder
    Below 1 V
    Key removed from ignition key cylinder
    9 to 14 V (or pulse generation)
    E6-23 (MPX2) - Body ground
    BR-R - Body ground
    Multiplex communication signal
    During communication
    Signal waveform


CHECK BACK DOOR ECU
B062706E02
  1. Disconnect the S2 back door ECU connector.

  2. Measure the voltages and resistances of the wire harness side connectors.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    S2-5 (BECU) - Body ground
    W-R - Body ground
    Power source circuit (From battery)
    Always
    11 to 14 V
    S2-3 (GND) - Body ground)
    W-B - Body ground
    Ground
    Always
    Below 1 Ω

  3. Reconnect the back door ECU connector.

  4. Measure the voltages of the wire harness side connectors.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    S2-6 (SIG) - Body ground
    B-R - Body ground
    Ignition switch signal
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    S5-5 (L) - Body ground
    L - Body ground
    Back door key-linked operated door lock switch input
    Back door key cylinder OFF
    Pulse generation
    Back door key cylinder ON (LOCK)
    Below 1 V
    S5-4 (UL) - Body ground
    R - Body ground
    Back door key-linked operated door unlock switch input
    Back door key cylinder OFF
    Pulse generation
    Back door key cylinder ON (UNLOCK)
    Below 1 V
    S2-1 (MPX2) - Body ground
    BR-R - Body ground
    Multiplex communication signal
    During communication
    Signal waveform
    S5-15 (ACT+) - Body ground
    G - Body ground
    Back door lock motor LOCK drive output
    Door control switch and door key cylinder OFF
    Below 1 V
    Door control switch or door key cylinder ON (LOCK)
    11 to 14 V → Below 1 V
    S5-14 (ACT-) - Body ground
    W - Body ground
    Back door lock motor UNLOCK drive output
    Door control switch and door key cylinder OFF
    Below 1 V
    Door control switch or door key cylinder ON (UNLOCK)
    11 to 14 V → Below 1 V

← TERMINALS OF ECU (Nov 2010 – Jul 2014)DATA LIST / ACTIVE TEST (from Jul 2007) →