2011-2016 FJ Cruiser · Service Manual COMMUNICATION SYSTEM

FAIL-SAFE CHART

System information · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2011 from Aug 2011


FAIL-SAFE FUNCTION
  1. When communication fails in any of the CAN bus lines (communication lines) due to a short circuit or other causes, the fail-safe function, which is specified for each system, operates to prevent the system from malfunctioning.

  2. Relationships between components and system functions and effects of communication failure on these functions. (For further details, see the pages for each system.)

    Function
    ECM
    Skid control ECU
    Yaw rate sensor
    Steering Angle Sensor
    Condition when communication impossible
    DTC detection (Driver detectable)
    VSC Control (Controls VSC/TRAC engine output)
    ○
    ●
    ○
    ○
    VSC function stops
    Detectable (Light comes on)

    HINT:
    1. ●: Control master
    2. ○: System related

← DIAGNOSIS SYSTEM (from Aug 2012)FAIL-SAFE CHART (Nov 2010 – Jul 2011) →