FAIL-SAFE CHART
System information · Vehicles built from Aug 2011
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2011 from Aug 2011
| FAIL-SAFE FUNCTION |
When communication fails in any of the CAN bus lines (communication lines) due to a short circuit or other causes, the fail-safe function, which is specified for each system, operates to prevent the system from malfunctioning.
Relationships between components and system functions and effects of communication failure on these functions. (For further details, see the pages for each system.)
Function
Behavior during CAN Failure
1. Control Master
2. System Related
Vehicle Behavior
DTC
(Driver Detectable)
Diagnostic Trouble Code
VDM Control
(Calculates torque level desired by driver based on accelerator pedal operation and controls torque according to this and other conditions in order to achieve smoother driving performance and improved stability, startability, reacceleration, and acceleration feel.)
1. ECM
Skid control ECU, Yaw rate sensor, Steering angle sensor
Does not calculate desired torque based on accelerator pedal operation, and does not provide smoother driving performance or improved stability, startability, reacceleration, or acceleration feel.
Nothing
(Does not calculate desired torque based on accelerator pedal operation, and does not provide smoother driving performance or improved stability, startability, reacceleration, or acceleration feel.)
Nothing
ECT indicator in meter
(Shift position, switch, mode, etc.)
1. ECM
2. Combination meter ECU
Indicators do not turn on.
Nothing
(Indicators do not turn on.)
Nothing
AI-SHIFT control
(Control the A/T in order to improve engine braking power and acceleration feeling.)
1. ECM
2. Skid control ECU
AI-SHIFT control does not operate.
Nothing
(AI-SHIFT control does not operate.)
Nothing
Cruise control
(adjusts the engine throttle valve opening amount automatically to control the vehicle.)
1. ECM
2. Skid control ECU, Combination meter ECU
Cruise control does not operate.
Nothing
(Indicator light blinks.)
Nothing
VSC control
(prevent skid when cornering)
1. Skid control ECU
2. ECM, Yaw rate sensor, Steering angle sensor
VSC does not operate.
(Light turns on.)
U0073
U0100
U0123
U0124
U0126
TRC control
(Stabilize vehicle start.)
1. Skid control ECU
2. ECM, Yaw rate sensor, Steering angle sensor
TRC does operate.
(Light turns on.)
U0073
U0100
U0123
U0124
U0126
ABS control
(Prevents wheels from locking during sudden braking.)
1. Skid control ECU
2. Yaw rate sensor
ABS does not operate.
(Light turns on.)
U0073
U0123
U0124
Tachometer
(Controls the tachometer according to engine speed signal.)
1. Combination meter ECU
2. ECM
The tachometer displays 0 rpm.
(Tachometer displays 0 rpm.)
U0100
Engine coolant temperature gauge
(Controls the gauge according to the engine coolant temperature signal.)
1. Combination meter ECU
2. ECM
The temperature gauge needle is at the middle of the "C" mark or below.
Nothing
(The temperature gauge needle is at the middle of the "C" mark or below.)
Nothing
Transmission fluid temperature gauge
(Controls the gauge according to the transmission fluid signals.)
1. Combination meter ECU
2. ECM
Control continues based on the last signal received.
Nothing
(Control continues based on the last signal received.)
Nothing
Speedometer
(Receives vehicle speed signal and drives indicator needle)
1. Combination meter ECU
2. Skid control ECU
Input signal controlled as 0 km/h.
(Input signal commanded to 0 km/h.)
U0129
Telltale
(Turns on, flashes, or turns off indicators based on CAN input signal)
1. Combination meter ECU
2. ECM, Skid control ECU, Airbag sensor assembly
Control continues based on the last signal received, or the indicator turns on.
(Control continues based on the last signal received, or the indicator turns on.)
U0151
U0129
Buzzer
(Receives buzzer request on CAN input signal)
1. Combination meter ECU
2. Skid control ECU, Airbag sensor assembly
Does not sound.
(Does not sound.)
U0151
U0129
Diag code display
(Receives diagnostic codes sent from ECU, and blinks the telltale light in the meter to match the code)
1. Combination meter ECU
2. ECM, Skid control ECU, Airbag sensor assembly
Controlled as normal mode.
Nothing
(Cannot be detected.)
Nothing
Event data recorder
(Records conditions such as the vehicle speed, the amount the accelerator is depressed, and the shift lever position when the event data recorder recording conditions are met.)
1. Airbag sensor assembly
2. ECM, Combination meter ECU
An invalid value is stored.
Nothing
(Cannot be detected.)
Nothing
Collision detection signal
(Notifies the system of a collision in order to perform a fuel cut at the time when a vehicle collision occurs.)
1. ECM
2. Airbag sensor assembly
In the event of a collision, fuel cut is not performed.
Nothing
(Cannot be detected.)
Nothing
Steering sensor
(Detects the steering wheel angle.)
1. Steering angle sensor
2. Skid control ECU
Nothing
VSC Indicator light turns on.
Nothing