2011-2016 FJ Cruiser · Service Manual BODY

INSPECTION

Inspection · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2011 from Aug 2011


INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

  1. B135957E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the tables below.

      Standard Resistance:
      Driver switch:
      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      Always
      (ON / OFF)
      UP
      9 (B) - 3 (U)
      1 (E) - 4 (D)
      Below 1 Ω
      Always
      (ON / OFF)
      OFF
      1 (E) - 3 (U)
      1 (E) - 4 (D)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN MANUAL
      4 (D) - 9 (B)
      1 (E) - 3 (U)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN AUTO
      4 (D) - 9 (B)
      1 (E) - 3 (U)
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Passenger side switch:
      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      9 (B) - 8 (U)
      1 (E) - 10 (D)
      Below 1 Ω
      OFF
      OFF
      1 (E) - 8 (U)
      1 (E) - 10 (D)
      Below 1 Ω
      OFF
      DOWN
      9 (B) - 10 (D)
      1 (E) - 8 (U)
      Below 1 Ω
      ON
      UP
      9 (B) - 8 (U)
      Below 1 Ω
      ON
      UP
      1 (E) - 10 (D)
      10 kΩ or higher
      ON
      OFF
      8 (U) - 10 (D)
      Below 1 Ω
      ON
      DOWN
      9 (B) - 10 (D)
      Below 1 Ω
      ON
      DOWN
      1 (E) - 8 (U)
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.

  1. Check the illumination operation.

    1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 9 (B)
      Battery negative (-) → Terminal 1 (E)
      Illumination comes on

      If the result is not as specified, replace the power window regulator master switch.

← REMOVAL (from Jul 2007)INSPECTION (Nov 2010 – Jul 2011) →