HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Jul 2007
*: Use a intelligent tester.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS |
| |||||
| 3.DTCS AND FREEZE FRAME DATA CHECK AND CLEARANCE* |
| |||||
| 4.PROBLEM SYMPTOM CONFIRMATION |
- Result:
Result
Proceed to
Symptom does not occur
A
Symptom occurs
B
|
|||||
| |||||
| 5.CHECK CAN COMMUNICATION SYSTEM* |
Check for the output DTCs relating to the CAN communication system.
- HINT:
- The ECU of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, be sure to check that there is no trouble in the CAN communication system.
- Result:
Result
Proceed to
CAN communication system DTC not output
A
CAN communication system DTC output
B
|
|||||
| |||||
| 6.DTC CHECK* |
- HINT:
- Click here.
- Result:
Result
Proceed to
DTC output
A
DTC not output
B
|
|||||
| |||||
| 7.DTC CHART |
- HINT:
- Click here.
| |||||
| 8.CIRCUIT INSPECTION |
- HINT:
- When 2 or more DTCs are detected, perform circuit inspections one by one until the problem is identified.
| |||||
| 9.PROBLEM IDENTIFICATION |
| |||||
| 10.REPAIR OR REPLACEMENT |
| |||||
| 11.CONFIRMATION TEST* |
| |||||