2011-2016 FJ Cruiser · Service Manual CRUISE CONTROL SYSTEM

INSPECTION

Inspection · Vehicles built from Jul 2007


INSPECT CLUTCH SWITCH

  1. E129559E01
    Remove the clutch switch.

  1. Measure the resistance and check that the results in accordance with the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Switch pin released (Clutch pedal depressed)
    10 kΩ or higher
    1 - 2
    Switch pin pushed in (Clutch pedal released)
    Below 1Ω

    If the result is not as specified, replace the clutch switch.

← REMOVAL (from Nov 2010)INSTALLATION (Jul 2007 – Oct 2010) →