INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Jul 2007 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL FRONT BUMPER EXTENSION LH |
Install the front bumper extension LH with the 4 nuts.
- Torque:
- 65 N*m{ 663 kgf*cm , 48 ft.*lbf }
| 2. INSTALL FRONT BUMPER EXTENSION RH |
- HINT:
- Use the same procedure as for the LH side.
| 3. INSTALL FRONT SUSPENSION MEMBER DAMPER ASSEMBLY (w/ Performance Damper) |
Install the front suspension member damper assembly with the 2 nuts.
- Torque:
- 65 N*m{ 663 kgf*cm , 48 ft.*lbf }
- NOTICE:
- Do not compress or extend the front suspension member damper assembly or rotate the rod.
| 4. INSTALL FRONT BUMPER REINFORCEMENT |
Install the front bumper reinforcement with the 4 nuts.
- Torque:
- 65 N*m{ 663 kgf*cm , 48 ft.*lbf }
| 5. INSTALL FRONT BUMPER UPPER RETAINER |
Engage the 2 hooks and install the front bumper upper retainer.
Install the 3 bolts.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
| 6. INSTALL FRONT BUMPER FILLER LH |
Engage the clip and the 2 claws and install the front bumper filler LH.
| 7. INSTALL FRONT BUMPER FILLER RH |
- HINT:
- Use the same procedure as for the LH side.
| 8. INSTALL FRONT BUMPER SIDE SUPPORT LH |
Engage the 2 claws and install the front bumper side support LH.
Install the 2 screws.
- Torque:
- 3.0 N*m{ 31 kgf*cm , 27 in.*lbf }
| 9. INSTALL FRONT BUMPER SIDE SUPPORT RH |
- HINT:
- Use the same procedure as for the LH side.
| 10. INSTALL FRONT BUMPER COVER |
Install the 4 clips.
Engage the 2 claws and install the front bumper cover.
Install the 8 screws and the 4 bolts.

- Torque:
- 3.0 N*m{ 31 kgf*cm , 27 in.*lbf } for screw
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf } for bolt
Install the 5 clips.
Remove the protective tape.
| 11. INSTALL RADIATOR GRILLE |
Engage the 5 clips and install the radiator grille.
Install the 2 screws.
- Torque:
- 3.0 N*m{ 31 kgf*cm , 27 in.*lbf }
Install the 2 clips.
