INSTALLATION
Removal / installation · Vehicles built Jul 2007 – Jul 2013
Versions by build date: Jul 2007 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
| 1.
INSTALL FRONT BUMPER EXTENSION LH |
 |
- Install the front bumper extension with the 4 nuts.
-
Torque:
- 65 N*m{
665 kgf*cm
, 48 ft.*lbf
}
| 2.
INSTALL FRONT BUMPER EXTENSION RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 3.
INSTALL FRONT BUMPER REINFORCEMENT |
 |
- Install the front bumper reinforcement with the 4 nuts.
-
Torque:
- 65 N*m{
665 kgf*cm
, 48 ft.*lbf
}
| 4.
INSTALL FRONT BUMPER UPPER RETAINER |
 |
- Engage the 2 hooks and install the front bumper upper retainer.
Tighten the 3 bolts.
-
Torque:
- 8.0 N*m{
80 kgf*cm
, 71 in.*lbf
}
| 5.
INSTALL FRONT BUMPER FILLER LH |
 |
- Engage the clip and the 2 claws and install the front bumper filler.
| 6.
INSTALL FRONT BUMPER FILLER RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 7.
INSTALL FRONT BUMPER SIDE SUPPORT LH |
 |
- Engage the 2 claws and install the front bumper side support.
Tighten the 2 screws.
-
Torque:
- 3.0 N*m{
30 kgf*cm
, 27 in.*lbf
}
| 8.
INSTALL FRONT BUMPER SIDE SUPPORT RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 9.
INSTALL FRONT BUMPER COVER |
 |
- Install the 4 clips.
- Engage the 2 claws and install the front bumper cover.
- Tighten the 8 screws and the 4 bolts.
-
Torque:
- 3.0 N*m{
30 kgf*cm
, 27 in.*lbf
}
for screw
- 8.0 N*m{
80 kgf*cm
, 71 in.*lbf
}
for bolt
- Install the 5 clips.
- Remove the protective tape.
| 10.
INSTALL RADIATOR GRILLE |
 |
- Engage the 5 clips and install the radiator grille.
Tighten the 2 screws.
-
Torque:
- 3.0 N*m{
30 kgf*cm
, 27 in.*lbf
}
Install the 2 clips.