2011-2016 FJ Cruiser · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Oct 2012 from Nov 2012


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE REAR BUMPER COVER

  1. B135140E01
    Apply protective tape as shown in the illustration.

  1. B135141
    Remove the 7 bolts and the 2 screws.

  1. B135142
    w/ Back Sonar:

    1. Disconnect the 2 wire to wire connectors.

  1. B135143
    Disengage the 6 claws and the 2 clips and remove the rear bumper cover.


3. REMOVE REAR BUMPER END RETAINER LH

  1. B134750
    Remove the screw.

  1. Disengage the 2 claws and remove the rear bumper end retainer.


4. REMOVE REAR BUMPER END RETAINER RH

HINT:
Use the same procedure as for the LH side.


5. REMOVE REAR BUMPER UPPER RETAINER LH

  1. B134751
    Remove the 2 screws.

  1. Disengage the 3 claws and remove the rear bumper upper retainer.


6. REMOVE REAR BUMPER UPPER RETAINER RH

HINT:
Use the same procedure as for the LH side.


7. REMOVE REAR BUMPER ENERGY ABSORBER

  1. B134752
    Disengage the 2 claws and remove the rear bumper energy absorber.


8. REMOVE REAR BUMPER SIDE STAY LH

  1. B138423
    Remove the bolt and the rear bumper side stay.


9. REMOVE REAR BUMPER SIDE STAY RH

HINT:
Use the same procedure as for the LH side.


10. REMOVE REAR BUMPER SIDE SUPPORT SUB-ASSEMBLY LH

  1. B135071
    Remove the 2 bolts and the rear bumper side support.


11. REMOVE REAR BUMPER SIDE SUPPORT SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.


12. REMOVE REAR BUMPER BAR BRACKET LH

  1. B138424
    Remove the bolt and the rear bumper bar bracket.


13. REMOVE REAR BUMPER BAR BRACKET RH

HINT:
Use the same procedure as for the LH side.

← COMPONENTS (from Nov 2012)REMOVAL (Nov 2010 – Oct 2012) →