2011-2016 FJ Cruiser · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Nov 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Oct 2012 from Nov 2012


1. REMOVE REAR BUMPER COVER

  1. B135140E03
    Apply protective tape as shown in the illustration.
    Text in Illustration 
    *1
    Protective Tape

  1. B340061
    Remove the 7 bolts and the 2 screws.

  1. B268275
    Disengage the clamp and separate the floor wire.

  1. Disconnect the connector.

    HINT:
    If the vehicle is equipped with back sonar, disconnect the connector and floor wire.

  1. B135143
    Disengage the 6 claws and the 2 clips and remove the rear bumper cover.


2. REMOVE REAR BUMPER END RETAINER LH

  1. B134750
    Remove the screw.

  1. Disengage the 2 claws and remove the rear bumper end retainer LH.


3. REMOVE REAR BUMPER END RETAINER RH

HINT:
Use the same procedure as for the LH side.


4. REMOVE REAR BUMPER UPPER RETAINER LH

  1. B134751
    Remove the 2 screws.

  1. Disengage the 3 claws and remove the rear bumper upper retainer LH.


5. REMOVE REAR BUMPER UPPER RETAINER RH

HINT:
Use the same procedure as for the LH side.


6. REMOVE REAR BUMPER ENERGY ABSORBER

  1. B134752
    Disengage the 2 claws and remove the rear bumper energy absorber.


7. REMOVE REAR BUMPER SIDE STAY LH

  1. B332239
    Remove the bolt, disengage the hook and remove the rear bumper side stay LH.


8. REMOVE REAR BUMPER SIDE STAY RH

HINT:
Use the same procedure as for the LH side.


9. REMOVE REAR BUMPER BAR BRACKET LH

  1. B271016
    Remove the bolt, disengage the hook and remove the rear bumper bar bracket LH.


10. REMOVE REAR BUMPER BAR BRACKET RH

HINT:
Use the same procedure as for the LH side.


11. REMOVE REAR BUMPER SIDE SUPPORT SUB-ASSEMBLY LH (for Single Tank Type)

  1. B340069
    Remove the 2 bolts.

  1. Disengage the 2 guides and remove the rear bumper side support sub-assembly LH.


12. REMOVE REAR BUMPER SIDE SUPPORT SUB-ASSEMBLY RH (for Single Tank Type)

HINT:
Use the same procedure as for the LH side.


13. REMOVE FUEL SUB TANK SUB-ASSEMBLY (for Double Tank Type)
(Click here)

14. REMOVE NO. 4 FUEL TANK BAND BRACKET (for Double Tank Type)

  1. for LH Side:

    1. B340052
      Disengage the 3 clamps and separate the wire harness.

    2. Remove the 4 bolts and the No. 4 fuel tank band bracket.

  1. for RH Side:

    1. B340051
      Remove the 4 bolts and the No. 4 fuel tank band bracket.

← REMOVAL (Nov 2010 – Oct 2012)DISASSEMBLY (Jul 2007 – Oct 2010) →