INSPECTION
Inspection · Vehicles built from Jul 2007
| INSPECT BACK WINDOW LOCK |
Check the operation of the back window lock actuator.

Connect the cable from the positive (+) battery lead to terminal 4 and the negative (-) battery lead to terminal 3, then check the operation of the actuator.
- Standard:
- Actuator operates to unlock back window.
Check the resistance of the back door window courtesy switch.

Using an ohmmeter, measure the resistance between the terminals when the latch is operated with a screwdriver.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
Unlocked
Below 1 Ω
1 - 2
Locked
10 kΩ or higher
