2011-2016 FJ Cruiser · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Aug 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

  1. A172212
    Install a new gasket onto the fuel tank.

  1. Set the fuel suction tube assembly to the fuel tank.

    NOTICE:
    Do not bend the arm of the fuel sender gauge.

  1. Fit the spline of the fuel suction tube assembly into the keyway of the fuel tank.

  1. A129920

  1. Install a new retainer.

    1. A129921E01
      Align the mark on a new retainer with the rib on the fuel tank as shown in the illustration.
      *1
      Start Mark (Fuel Tank Side)
      *2
      Start Mark (Retainer Side)

    2. A172214E03
      Using SST, turn the retainer 740° to 760° clockwise (more than 2 turns), and position the mark on the retainer within range A to install it.
      *1
      Fuel Tank Side Mark
      *2
      Retainer Side Mark
      SST
      09808-14020   (09808-01410, 09808-01420, 09808-01430)

      HINT:
      Align the tips of the SST with the ribs on the retainer.


2. INSTALL FUEL TANK ASSEMBLY
  1. Install the fuel tank assembly (Click here).

← INSTALLATION (Jul 2007 – Jul 2009)COMPONENTS (from Nov 2012) →