2011-2016 FJ Cruiser · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Aug 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


1. REMOVE FUEL TANK ASSEMBLY
  1. Remove the fuel tank assembly (Click here).


2. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

NOTICE:
Protect the connector and tube joint with masking tape or equivalent to prevent any foreign matter from sticking to them. Clean any dirt and foreign matter from the fuel suction tube assembly before removing.

  1. A076683E01
    Using a SST, loosen the retainer.
    SST
    09808-14020   (09808-01410, 09808-01420, 09808-01430)

    HINT:
    Align the tips of the SST with the ribs on the retainer.

  1. Remove the retainer.

  1. Pull the fuel pump assembly out of the fuel tank.

    NOTICE:
    Do not bend the arm of the sender gauge.

  1. A172212
    Remove the gasket from the fuel tank.

← REMOVAL (Jul 2007 – Jul 2009)DISASSEMBLY (Jul 2007 – Jul 2009) →