2011-2016 FJ Cruiser · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY

  1. B271473
    Disengage the 4 claws.

  1. Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 guides and remove the parking brake hole cover.


3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

  1. B133893
    Remove the shift lever knob.


4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

  1. B133895
    Remove the shift lever knob.


5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY

  1. B271474
    Shift the shift lever into the N position.

  1. Disengage the 5 clips and 3 guides and remove the console upper rear panel.


6. REMOVE BOX BOTTOM MAT

  1. B133899
    Remove the box bottom mat.


7. REMOVE FRONT CONSOLE BOX

  1. B271475
    Remove the 4 <H> bolts.

  1. Disengage the 5 guides and remove the console box.


8. REMOVE PARKING BRAKE LEVER
  1. Release the parking brake lever.

  1. Disconnect the parking brake switch connector.

  1. G022563
    Remove the adjusting nut.

  1. G022564E01
    Disconnect parking brake cables No. 2 and No. 3 from the parking brake pull rod.

  1. Remove the parking brake pull rod, bush and set spring.

  1. Remove the straight pin from the parking brake lever.

  1. G022566E01
    Remove the washer.

  1. Remove the 2 bolts and center support from the parking brake lever.

  1. D030033
    Remove the 2 bolts and parking brake lever.


9. REMOVE PARKING BRAKE SWITCH
  1. Remove the screw and parking brake switch from the parking brake lever.

← REMOVAL (Jul 2007 – Oct 2010)INSTALLATION (Jul 2007 – Oct 2010) →