U0073/94 Control Module Communication Bus OFF
Diagnostic trouble codes · Vehicles built Jul 2007 – Jul 2009
Also covers:
- U0100/65 Lost Communication with ECM / PCM
- U0123/62 Lost Communication with Yaw Rate Sensor Module
- U0124/95 Lost Communication with Lateral Acceleration Sensor Module
- U0126/63 Lost Communication with Steering Angle Sensor Module
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010
DESCRIPTION
| DTC No. |
DTC Detecting Conditions |
Trouble Area |
| U0073/94 |
When either of following conditions (1 or 2) detected:
|
CAN communication system |
| U100/65 |
When IG1 terminal voltage 10 V or more and vehicle speed 15 km/h (9 mph) or more, either of following conditions (1 or 2) occurs 10 times in succession:
|
CAN communication system |
| U0123/62 |
When IG1 terminal voltage 10 V or more, either of following conditions (1 or 2) detected:
|
CAN communication system |
| U0124/95 |
When IG1 terminal voltage 9.5 V or more, either of following conditions (1 or 2) detected:
|
CAN communication system |
| U0123/63 |
When IG1 terminal voltage 10 V or more, either of following conditions (1 or 2) detected:
|
CAN communication system |
INSPECTION PROCEDURE
| 1. RECONFIRM DTC |
Clear the DTC(s) (Click here).
Check if the same DTC(s) is output (Click here).
- Result:
Result
Proceed to
DTC output
A
DTC not output
B
|
|
||||
| A | ||
| ||
