U0073 Control Module Communication Bus OFF
Diagnostic trouble codes · Vehicles built Nov 2010 – Jul 2011
Also covers:
- U0100 Lost Communication with ECM / PCM
- U0123 Lost Communication with Yaw Rate Sensor Module
- U0124 Lost Communication with Lateral Acceleration Sensor Module
- U0126 Lost Communication with Steering Angle Sensor Module
Versions by build date: Nov 2010 – Jul 2011 Aug 2011 – Jul 2012 from Aug 2012
DESCRIPTION
| DTC Code |
DTC Detection Condition |
Trouble Area |
| U0073 |
When either of following conditions (1 or 2) detected:
|
CAN communication system |
| U100 |
When IG1 terminal voltage 10 V or more and vehicle speed 15 km/h (9 mph) or more, either of following conditions (1 or 2) occurs 10 times in succession:
|
CAN communication system |
| U0123 |
When IG1 terminal voltage 10 V or more, either of following conditions (1 or 2) detected:
|
CAN communication system |
| U0124 |
When IG1 terminal voltage 9.5 V or more, either of following conditions (1 or 2) detected:
|
CAN communication system |
| U0126 |
When IG1 terminal voltage 10 V or more, either of following conditions (1 or 2) detected:
|
CAN communication system |
INSPECTION PROCEDURE
| 1. RECONFIRM DTC |
Clear the DTCs (Click here).
Check if the same DTCs are output (Click here).
Result Result
Proceed to
DTC output
A
DTC not output
B
|
|
||||
| A | ||
| ||
