2011-2016 FJ Cruiser · Service Manual SUSPENSION & AXLE

INSPECTION

Inspection · Vehicles built from Jul 2007


INSPECT REAR AXLE SHAFT

R012254
  1. Using a dial indicator, measure the rear axle shaft runout and flange runout.

    Maximum runout:
    Shaft runout:
    1.5 mm (0.0591 in.)
    Flange runout:
    0.05 mm (0.0020 in.)

    If the rear axle shaft or flange is damaged or worn, or of runout of greater than the maximum, replace the rear axle shaft.

← DISASSEMBLY (from Jul 2007)REASSEMBLY (from Jul 2007) →