B1630/23 Driver Side Rear Airbag Sensor Malfunction
Diagnostic trouble codes · Vehicles built Nov 2010 – Jul 2012
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012
DESCRIPTION
The driver side - rear airbag sensor consists of parts including the diagnostic circuit and the lateral deceleration sensor.When the center airbag sensor assembly receives signals from the lateral deceleration sensor, it determines whether or not the SRS should be activated.
DTC B1630/23 is recorded when a malfunction is detected in the driver side - rear airbag sensor.
| DTC No. |
DTC Detection Condition |
Trouble Area |
| B1630/23 |
|
|
WIRING DIAGRAM




INSPECTION PROCEDURE
| 1. CHECK DRIVER SIDE - REAR AIRBAG SENSOR |
Turn the ignition switch off.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Interchange the driver side - rear airbag sensor with the front passenger side - rear airbag sensor and connect the connectors to them.
Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Clear the DTCs stored in the memory (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Check for DTCs (Click here).
Text in Illustration *a
Front Passenger Side - Rear Airbag Sensor
*b
Driver Side - Side Airbag Sensor
*c
Center Airbag Sensor Assembly
*d
DLC3
*e
DTC 23
*f
DTC 24
Result Result
Proceed to
DTCs B1630/23 and B1635/24 are not output.
A
DTC B1630/23 is output.
B
DTC B1635/24 is output.
C
- HINT:
- DTCs other than DTC B1630/23 and B1635/24 may be output at this time, but they are not related to this check.
|
|
||||
|
|
||||
| A | ||
| ||
