2011-2016 FJ Cruiser · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Aug 2009 – Oct 2010

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 from Nov 2010


1. REMOVE GENERATOR ASSEMBLY
  1. Remove the generator (Click here).


2. SEPARATE COOLER COMPRESSOR ASSEMBLY

HINT:
It is not necessary to completely remove the compressor. With the hoses connected to the compressor, hang the compressor on the vehicle body with a rope.

  1. Disconnect the cooler compressor connector.

  1. A225902
    Remove the bolt and separate the suction hose.

  1. A225903
    Remove the 3 bolts and nut.

  1. Remove the stud bolt and separate the cooler compressor assembly.


3. REMOVE CRANKSHAFT POSITION SENSOR

  1. A226622
    Disconnect the sensor connector.

  1. Remove the bolt and sensor.

← REMOVAL (Jul 2007 – Jul 2009)REMOVAL (from Nov 2010) →