REMOVAL
Removal / installation · Vehicles built Jul 2007 – Jul 2009
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 from Nov 2010
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE FAN |
 |
Refer to the procedures up to "REMOVE FAN "(Click here).
| 3.
REMOVE GENERATOR ASSEMBLY |
 |
Refer to the procedures up to "REMOVE GENERATOR ASSEMBLY" (Click here)
| 4.
SEPARATE COOLER COMPRESSOR ASSEMBLY |
 |
Remove the bolt, then separate the suction hose sub-assembly.
- Disconnect the cooler compressor assembly connector.
Remove the 4 bolts, then separate the cooler compressor assembly from the V-ribbed belt tensioner assembly.
| 5.
REMOVE CRANKSHAFT POSITION SENSOR |
 |
Disconnect the crankshaft position sensor connector.
Remove the bolt, then remove the crankshaft position sensor.