REMOVAL
Removal / installation · Vehicles built from Nov 2010
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 from Nov 2010
| 1. REMOVE GENERATOR ASSEMBLY |
Remove the generator (Click here).
| 2. SEPARATE COOLER COMPRESSOR ASSEMBLY |
- HINT:
- It is not necessary to completely remove the compressor. With the hoses connected to the compressor, hang the compressor on the vehicle body with a rope.
Disconnect the cooler compressor connector.
Remove the bolt and separate the suction hose.

Remove the 3 bolts and nut.

Using a E8 "TORX" socket wrench, remove the stud bolt and separate the cooler compressor assembly.
| 3. REMOVE CRANKSHAFT POSITION SENSOR |
Disconnect the sensor connector.

Remove the bolt and sensor.
