INSTALLATION
Removal / installation · Vehicles built from Nov 2010
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 from Nov 2010
| 1. INSTALL KNOCK SENSOR |
Install the 2 sensors with the 2 bolts as shown in the illustration.

Text in Illustration *a
for Bank 2:
*b
for Bank 1:
*c
Engine Rear
*d
Top
*e
Engine Front
- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
Connect the 2 sensor connectors.
| 2. INSTALL NO. 1 WATER OUTLET PIPE |
Install the No. 1 water outlet pipe with the 2 nuts and bolt.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
Connect the 4 wire harness clamps.
| 3. INSTALL CYLINDER HEAD SUB-ASSEMBLY (for Bank 1) |
Install the cylinder head (Click here).
