INSPECTION
Inspection · Vehicles built from Aug 2009
Versions by build date: Jul 2007 – Jul 2009 from Aug 2009
| INSPECT PURGE VSV |
 |
- Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
20°C (68°F)
|
23 to 26 Ω
|
1 - Body ground
|
Always
|
10 MΩ or higher
|
2 - Body ground
|
Check the operation of the purge VSV.
- Check that air does not flow from port E to port F.
Text in Illustration
*1
|
Port E
|
*2
|
Port F
|
*a
|
Air
|
- OK:
Condition
|
Specified Condition
|
No continuity
|
There is no air flow
|
- Apply battery voltage to the connector, and check the purge VSV operation.
Text in Illustration
*1
|
Port E
|
*2
|
Port F
|
*a
|
Air
|
- OK:
Condition
|
Specified Condition
|
With continuity
|
There is air flow
|
If the result is not as specified, replace the purge VSV.