INSTALLATION
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
| 1.
INSTALL INTEGRATION CONTROL PANEL ASSEMBLY (Built-in Front Passenger Seat Belt Warning Light) |
 |
- Connect the blower switch connector and the 2 air conditioner amplifier connectors.
Engage the 4 clips and install the front passenger seat belt warning light.
Tighten the 2 screws.
| 2.
INSTALL INSTRUMENT PANEL GARNISH RH
|
 |
- Engage the 3 clips and install the instrument panel garnish.
Install screw <H>.
| 3.
INSTALL INSTRUMENT PANEL GARNISH LH
|
 |
- Engage the 3 clips and install the instrument panel garnish.
Install 2 <H> screws.
| 4.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 3.9 N*m{
40 kgf*cm
, 35 in.*lbf
}