2011-2016 FJ Cruiser · Service Manual RESTRAINTS

INSTALLATION

Removal / installation · Vehicles built Nov 2010 – Jul 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012


1. INSTALL INTEGRATION CONTROL PANEL ASSEMBLY (Built-in Front Passenger Seat Belt Warning Light)

  1. B138488
    Connect the blower switch connector and the 2 air conditioner amplifier connectors.

  1. Engage the 4 clips and install the front passenger seat belt warning light.

  1. Tighten the 2 screws.


2. INSTALL INSTRUMENT PANEL GARNISH RH
  1. w/ Assist Grip:

    1. Engage the guide and the 2 clips and install the front pillar garnish.

  1. w/o Assist Grip:

    1. Engage the guide and the 2 clips and install the front pillar garnish.

    2. Tighten the bolt.

    3. B271491
      Engage the claw and close the cover.


3. INSTALL INSTRUMENT PANEL GARNISH LH

HINT:
Use the same procedure as for the RH side.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← INSTALLATION (Jul 2007 – Oct 2010)INSTALLATION (from Aug 2012) →