INSTALLATION
Removal / installation · Vehicles built from Aug 2012
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
| 1. INSTALL INTEGRATION CONTROL PANEL ASSEMBLY (Built-in Front Passenger Seat Belt Warning Light) |
Connect the blower switch connector and the 2 air conditioner amplifier connectors.

Engage the 4 clips and install the front passenger seat belt warning light.
Tighten the 2 screws.
| 2. INSTALL INSTRUMENT PANEL GARNISH RH |
Engage the 3 clips and install the instrument panel garnish.
Install the screw <G>.
| 3. INSTALL INSTRUMENT PANEL GARNISH LH |
Engage the 3 clips and install the instrument panel garnish.
Install the screw <G>.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 3.9 N*m{ 40 kgf*cm , 35 in.*lbf }
