2011-2016 FJ Cruiser · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Jul 2007 – Jul 2009


INSPECT INTAKE MANIFOLD FOR WARPAGE

A076807E02
  1. Using a precision straight edge and feeler gauge, measure the warpage of the contact surfaces of the cylinder head and intake air surge tank.

    Maximum warpage:
    Intake air surge tank side:
    0.8 mm (0.031 in.)
    Cylinder head side:
    0.2 mm (0.008 in.)

    If the warpage is greater than the maximum, replace the intake manifold.

← REMOVAL (from Aug 2014)INSTALLATION (Jul 2007 – Jul 2009) →