INSTALLATION
Removal / installation · Vehicles built Aug 2009 – Jul 2011
Versions by build date: Aug 2009 – Jul 2011 Aug 2011 – Jul 2014 from Aug 2014
| 1.
INSTALL FRONT CRANKSHAFT OIL SEAL |
 |
Apply MP grease to the lip of a new oil seal.
Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.
- SST
- 09226-10010
- NOTICE:
- Keep the lip free from foreign matter.
- Do not tap the oil seal at an angle.
| 2.
INSTALL CRANKSHAFT PULLEY
|
 |
Using SST, install the crankshaft pulley with the pulley set bolt.
- SST
- 09213-54015
(91651-60855)
09330-00021
-
Torque:
- 260 N*m{
2651 kgf*cm
, 192 ft.*lbf
}
| 3.
INSTALL OIL FILTER BRACKET
|
 |
Install the oil filter bracket and new gasket with the 2 nuts and bolt.
-
Torque:
- 21 N*m{
214 kgf*cm
, 15 ft.*lbf
}
| 4.
INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY (w/ Oil Cooler) |
 |
Connect the 2 hoses and water by-pass pipe.
Text in Illustration
*a
|
Upper
|
*b
|
Rear
|
- HINT:
- The direction of the hose clamp is indicated in the illustration.
Install the 3 bolts.
-
Torque:
- 10 N*m{
102 kgf*cm
, 7 ft.*lbf
}
| 5.
INSTALL FAN SHROUD |
 |
Install the fan shroud (Click here).
| 6.
INSPECT FOR ENGINE OIL LEAK |
|
| 7.
INSPECT FOR COOLANT LEAK |
|