2011-2016 FJ Cruiser · Service Manual CRUISE CONTROL SYSTEM

TERMINALS OF ECM

System information · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 from Nov 2010


CHECK ECM
B125006E03
  1. Measure the voltages of the wire harness side connectors.

Standard voltage: 
Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
TC (E47-23) - E1 (B3-1)
P-L - BR
DTC output signal
Ignition switch ON
11 to 14 V
TC (E47-23) - E1 (B3-1)
P-L - BR
DTC output signal
Ignition switch ON
Connect terminals TC and CG of DLC3
Below 2 V
ST1- (E47-16) - E1 (B3-1)
R-L - BR
Cruise cancel input signal
Ignition switch ON
Depress brake pedal
Below 1 V
ST1- (E47-16) - E1 (B3-1)
R-L - BR
Cruise cancel input signal
Ignition switch ON
Release brake pedal
11 to 14 V
STP (E47-15) - E1 (B3-1)
G-Y - BR
Stop light switch input signal
Ignition switch ON
Depress brake pedal
11 to 14 V
STP (E47-15) - E1 (B3-1)
G-Y - BR
Stop light switch input signal
Ignition switch ON
Release brake pedal
Below 1 V
CCS (E46-2) - E1 (B3-1)
L-B - BR
Cruise control main switch output signal
Ignition switch ON
11 to 14 V
CCS (E46-2) - E1 (B3-1)
L-B - BR
Cruise control main switch output signal
Ignition switch ON
CANCEL switch held ON
6.6 to 10.1 V
CCS (E46-2) - E1 (B3-1)
L-B - BR
Cruise control main switch output signal
Ignition switch ON
-/SET switch held ON
4.5 to 7.1 V
CCS (E46-2) - E1 (B3-1)
L-B - BR
Cruise control main switch output signal
Ignition switch ON
+/RES switch held ON
2.3 to 4.5 V
CCS (E46-2) - E1 (B3-1)
L-B - BR
Cruise control main switch output signal
Ignition switch ON
MAIN switch held ON
Below 1 V
E1 (B3-1) - Body ground
BR - Body ground
Ground
Always
Below 1 V
PI (E46-18) - E1 (B3-1)
P-G - BR
Cruise main indicator light input signal
Ignition switch ON
Cruise control main switch held ON
0 to 3 V
PI (E46-18) - E1 (B3-1)
P-G - BR
Cruise main indicator light input signal
Ignition switch ON
Cruise control main switch held OFF
11 to 14 V
D (E46-21) - E1 (B3-1)
L-B - BR
Clutch switch input signal
Ignition switch ON
Depress clutch pedal
Below 1 V
D (E46-21) - E1 (B3-1)
L-B - BR
Clutch switch input signal
Ignition switch ON
Release clutch pedal
11 to 14 V
If the result is not as specified, there may be a malfunction on the wire harness side.
← PROBLEM SYMPTOMS TABLE (from Aug 2014)TERMINALS OF ECM (Aug 2009 – Oct 2010) →