B279C Theft Deterrent System Presence Detection
Diagnostic trouble codes · Vehicles built from Aug 2009
DESCRIPTION
If an ECM that is incompatible with the engine immobiliser system is installed, the ECM outputs this DTC.| DTC No. |
DTC Detection Condition |
Trouble Area |
| B279C |
When ECM that is incompatible with engine immobiliser system is installed |
ECM |
INSPECTION PROCEDURE
- NOTICE:
- If the ECM is replaced, register the ECU communication ID.
| 1. CLEAR DTC |
Clear the DTC (Click here).
| NEXT | |
| 2. CHECK DTC OUTPUT |
Recheck for DTC (Click here).
- OK:
- DTC B279C output does not reoccur.
|
|
||||
| OK | ||
| ||
